D260 LIQUIFLEX Wall Fillet
Asymmetric fillet trim for use against abutting walls.
Also provides expansion and perimeter ventilation.
The D trim is a fillet of trim for use against abutting walls.
It will also provide expansion and perimeter ventilation and is compatible with C2 and C3 universal corners.
Place the D trim against the vertical face and push down diagonally into the corner until the trim fits snugly.
Where the D trim needs to be joined it should be bonded with a strip polyurethane adhesive and bandaged together.
The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc.
Apply polyurethane adhesive to the back of the C trim every 300mm.
Fit the trim into the slot and press firmly back to the wall to overlap the D trim.
Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in.
A smooth finish can be obtained by wiping the sealant with a moistened finger.
Dimensions: Girth - 260mm
Fillet - 135mm and 70mm
Upstand height - 120mm.