C100LIQUIFLEX Simulated Lead Flashing
Replaces traditional lead flashing.
Dark grey, non-adhesive finish to simulate the appearance of lead.
Do not topcoat.
The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc.
Apply polyurethane adhesive to the back of the C trim every 300mm.
Fit the trim into the slot and press firmly back to the wall to overlap the D trim.
Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in.
A smooth finish can be obtained by wiping the sealant with a moistened finger.
Dimensions:
Vertical cover - 100mm.
Wall penetration - 35mm.