B230 LIQUIFLEX Raised Edge Trim
Flat roof edge detail to prevent water run off.
Drip matches A170.
A single batten is fixed level with the top edge of the deck.
Apply 30mm beads of trim adhesive to the batten every 300mm.
Rub the trim into place and nail through the top of the trim into the decking.
Do not nail through the front of the trim.
If a ladder is being leant against a B type trim for access to the roof, the trim will need reinforced to avoid deformation.
The trim can be doubled up by slotting a section of extra trim within the section where the ladder will be used.
It can also be reinforced with an extra layer of LIQUIFLEX laminate and tissue to maintain a smooth finish.
Alternatively, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.
Girth – 230mm
Depth – 105mm